Clinical and imaging characteristics of growing skull fractures in children.

Growing skull fracture (GSF) is an uncommon form of head trauma among young children. In prior research, the majority of GSFs were typically classified based on pathophysiological mechanisms or the duration following injury. However, considering the varying severity of initial trauma and the disparities in the time elapsed between injury and hospital admission among patients, our objective was to devise a clinically useful classification system for GSFs among children, grounded in both clinical presentations and imaging findings, in order to guide clinical diagnosis and treatment decisions. The clinical and imaging data of 23 patients less than 12 years who underwent GSF were retrospectively collected and classified into four types. The clinical and imaging characteristics of the different types were reviewed in detail and statistically analyzed. In all 23 patients, 5 in type I, 7 in type II, 8 in type III, and 3 in type IV. 21/23 (91.3%) were younger than 3 years. Age ≤ 3 years and subscalp fluctuating mass were common in type I-III (P = 0.026, P = 0.005). Fracture width ≥ 4 mm was more common in type II-IV (P = 0.003), while neurological dysfunction mostly occurred in type III and IV (P < 0.001).Skull "crater-like" changes were existed in all type IV. 10/12 (83.3%) patients with neurological dysfunction had improved in motor or linguistic function. There was not improved in patients with type IV. GCS in different stage has its unique clinical and imaging characteristics. This classification could help early diagnosis and treatment for GCS, also could improve the prognosis significantly.

Injectable and In Situ Formed Dual-Network Hydrogel Reinforced by Mesoporous Silica Nanoparticles and Loaded with BMP-4 for the Closure and Repair of Skull Defects.

Bone defects are a common and challenging orthopedic problem with poor self-healing ability and long treatment cycles. The difficult-to-heal bone defects cause a significant burden of medical expenses on patients. Currently, biomaterials with mechanical stability, long-lasting action, and osteogenic activity are considered as a suitable way to effectively heal bone defects. Here, an injectable double network (DN) hydrogel prepared using physical and chemical cross-linking methods is designed. The first rigid network is constructed using methylpropenylated hyaluronic acid (HAMA), while the addition of chitosan oligosaccharide (COS) forms a second flexible network by physical cross-linking. The mesoporous silica nanoparticles (MSN) loaded with bone morphogenetic protein-4 (BMP-4) were embedded into DN hydrogel, which not only enhanced the mechanical stability of the hydrogel, but also slowly released BMP-4 to achieve long-term skull repair. The designed composite hydrogel showed an excellent compression property and deformation resistance. In vitro studies confirmed that the HAMA/COS/MSN@BMP-4 hydrogel had good biocompatibility and showed great potential in supporting proliferation and osteogenic differentiation of mouse embryo osteoblast precursor (MC3T3-E1) cells. Furthermore, in vivo studies confirmed that the DN hydrogel successfully filled and closed irregular skull defect wounds, effectively promoted bone regeneration, and significantly promoted bone repair compared with the control group. In addition, HAMA/COS/MSN@BMP-4 hydrogel precursor solution can quickly form hydrogel in situ at the wound by ultraviolet light, which can be applied to the closure and repair of wounds of different shapes, which provides the new way for the treatment of bone defects.

Comprehensive functional outcome analysis and importance of bone remodelling on personalized cranioplasty treatment using Poly(methyl methacrylate) bone flaps.

Cranioplasty involves the surgical reconstruction of cranial defects arising as a result of various factors, including decompressive craniectomy, cranial malformations, and brain injury due to road traffic accidents. Most of the modern decompressive craniectomies (DC) warrant a future cranioplasty surgery within 6-36 months. The conventional process of capturing the defect impression and polymethyl methacrylate (PMMA) flap fabrication results in a misfit or misalignment at the site of implantation. Equally, the intra-operative graft preparation is arduous and can result in a longer surgical time, which may compromise the functional and aesthetic outcomes. As part of a multicentric pilot clinical study, we recently conducted a cohort study on ten human subjects during 2019-2022, following the human ethics committee approvals from the participating institutes. In the current study, an important aspect of measuring the extent of bone remodelling during the time gap between decompressive craniectomy and cranioplasty was successfully evaluated. The sterilised PMMA bone flaps were implanted at the defect area during the cranioplasty surgery using titanium mini plates and screws. The mean surgery time was 90 ± 20 min, comparable to the other clinical studies on cranioplasty. No signs of intra-operative and post-operative complications, such as cerebrospinal fluid leakage, hematoma, or local and systemic infection, were clinically recorded. Importantly, aesthetic outcomes were excellent for all the patients, except in a few clinical cases, wherein the PMMA bone flap was to be carefully customized due to the remodelling of the native skull bone. The extent of physiological remodelling was evaluated by superimposing the pre-operative and post-operative CT scan data after converting the defect morphology into a 3D model. This study further establishes the safety and efficacy of a technologically better approach to fabricate patient-specific acrylic bone flaps with improved surgical outcomes. More importantly, the study outcome further demonstrates the strategy to address bone remodelling during the patient-specific implant design.

Death in the high mountains: Evidence of interpersonal violence during Late Chalcolithic and Early Bronze Age at Roc de les Orenetes (Eastern Pyrenees, Spain).

OBJECTIVES: To test a hypothesis on interpersonal violence events during the transition between Chalcolithic and Bronze Age in the Eastern Pyrenees, to contextualize it in Western Europe during that period, and to assess if these marks can be differentiated from secondary funerary treatment. MATERIALS AND METHODS: Metric and non-metric methods were used to estimate the age-at-death and sex of the skeletal remains. Perimortem injuries were observed and analyzed with stereomicroscopy and confocal microscopy. RESULTS: Among the minimum of 51 individuals documented, at least six people showed evidence of perimortem trauma. All age groups and both sexes are represented in the skeletal sample, but those with violent injuries are predominantly males. Twenty-six bones had 49 injuries, 48 of which involved sharp force trauma on postcranial elements, and one example of blunt force trauma on a cranium. The wounds were mostly located on the upper extremities and ribs, anterior and posterior. Several antemortem lesions were also documented in the assemblage. DISCUSSION: The perimortem lesions, together with direct dating, suggest that more than one episode of interpersonal violence took place between the Late Chalcolithic and the Early Bronze Age in northeastern Spain. The features of the sharp force trauma indicate that different weapons were used, including sharp metal objects and lithic projectiles. The Roc de les Orenetes assemblage represents a scenario of recurrent lethal confrontation in a high mountain geographic context, representing the evidence of inferred interpersonal violence located at the highest altitude settings in the Pyrenees, at 1836 meters above sea level.

OBJETIVOS: Estudiar nuevas evidencias de violencia interpersonal durante la transición entre el Calcolítico y la Edad del Bronce en los Pirineos Orientales, contextualizarlas en la Europa occidental durante ese periodo, y diferenciar estas marcas del tratamiento funerario secundario. MATERIALES Y MÉTODOS: Se han utilizado métodos métricos y no métricos para estimar la edad de muerte y sexo de los restos esqueléticos. Las heridas perimortem fueron observadas y analizadas con estereomicroscopio y microscopio confocal. RESULTADOS: Entre el mínimo de 51 individuos documentados en el yacimiento, al menos seis individuos mostraron evidencias de traumas perimortem. Todos los grupos de edad y ambos sexos están representados en el enterramiento, pero aquellos con heridas violentas son mayoritariamente masculinos. Veintiséis huesos tenían un total de 49 lesiones, 48 de ellos traumatismos cortantes en elementos postcraneales, y un traumatismo contundente en un cráneo. Las heridas estaban mayoritariamente localizadas en las extremidades superiores y costillas, tanto anterior como posterior. Varias lesiones antemortem fueron también documentadas en el conjunto. DISCUSIÓN: Las lesiones perimortem, junto a las dataciones directas, sugieren que se produjo más de un episodio de violencia interpersonal entre el Calcolítico Final y la Edad del Bronce Antiguo en el noreste de España. Las características de los traumatismos cortantes indican que se utilizaron diferentes armas, incluyendo objetos cortantes de metal y proyectiles líticos. El conjunto de Roc de les Orenetes representa un escenario de confrontaciones letales recurrentes en un contexto geográfico de alta montaña, representando la evidencia de violencia interpersonal localizada a mayor altitud de los Pirineos, a 1836 metros sobre el nivel del mar.

Skull and Scalp En-Bloc Harvest Protects Calvarial Perfusion: A Cadaveric Study.

BACKGROUND: Calvarial defects are severe injuries that can result from a wide array of etiologies. Reconstructive modalities for these clinical challenges include autologous bone grafting or cranioplasty with biocompatible alloplastic materials. Unfortunately, both approaches are limited by factors such as donor site morbidly, tissue availability, and infection. Calvarial transplantation offers the potential opportunity to address skull defect form and functional needs by replacing "like-with-like" tissue but remains poorly investigated. METHODS: Three adult human cadavers underwent circumferential dissection and osteotomy to raise the entire scalp and skull en-bloc. The vascular pedicles of the scalp were assessed for patency and perfused with color dye, iohexol contrast agent for computed tomography (CT) angiography, and indocyanine green for SPY-Portable Handheld Imager assessment of perfusion to the skull. RESULTS: Gross changes were appreciated to the scalp with color dye, but not to bone. CT angiography and SPY-Portable Handheld Imager assessment confirmed perfusion from the vessels of the scalp to the skull beyond midline. CONCLUSION: Calvarial transplantation may be a technically viable option for skull defect reconstruction that requires vascularized composite tissues (bone and soft tissue) for optimal outcomes.

Multimodality imaging reveals angiogenic evolution in vivo during calvarial bone defect healing.

The healing of calvarial bone defects is a pressing clinical problem that involves the dynamic interplay between angiogenesis and osteogenesis within the osteogenic niche. Although structural and functional vascular remodeling (i.e., angiogenic evolution) in the osteogenic niche is a crucial modulator of oxygenation, inflammatory and bone precursor cells, most clinical and pre-clinical investigations have been limited to characterizing structural changes in the vasculature and bone. Therefore, we developed a new multimodality imaging approach that for the first time enabled the longitudinal (i.e., over four weeks) and dynamic characterization of multiple in vivo functional parameters in the remodeled vasculature and its effects on de novo osteogenesis, in a preclinical calvarial defect model. We employed multi-wavelength intrinsic optical signal (IOS) imaging to assess microvascular remodeling, intravascular oxygenation (SO2), and osteogenesis; laser speckle contrast (LSC) imaging to assess concomitant changes in blood flow and vascular maturity; and micro-computed tomography (µCT) to validate volumetric changes in calvarial bone. We found that angiogenic evolution was tightly coupled with calvarial bone regeneration and corresponded to distinct phases of bone healing, such as injury, hematoma formation, revascularization, and remodeling. The first three phases occurred during the initial two weeks of bone healing and were characterized by significant in vivo changes in vascular morphology, blood flow, oxygenation, and maturity. Overall, angiogenic evolution preceded osteogenesis, which only plateaued toward the end of bone healing (i.e., four weeks). Collectively, these data indicate the crucial role of angiogenic evolution in osteogenesis. We believe that such multimodality imaging approaches have the potential to inform the design of more efficacious tissue-engineering calvarial defect treatments.

Prediction of skull fractures in blunt force head traumas using finite element head models.

Traumatic head injuries remain a leading cause of death and disability worldwide. Although skull fractures are one of the most common head injuries, the fundamental mechanics of cranial bone and its impact tolerance are still uncertain. In the present study, a strain-rate-dependent material model for cranial bone has been proposed and implemented in subject-specific Finite Element (FE) head models in order to predict skull fractures in five real-world fall accidents. The subject-specific head models were developed following an established image-registration-based personalization pipeline. Head impact boundary conditions were derived from accident reconstructions using personalized human body models. The simulated fracture lines were compared to those visible in post-mortem CT scans of each subject. In result, the FE models did predict the actual occurrence and extent of skull fractures in all cases. In at least four out of five cases, predicted fracture patterns were comparable to ones from CT scans and autopsy reports. The tensile material model, which was tuned to represent rate-dependent tensile data of cortical skull bone from literature, was able to capture observed linear fractures in blunt indentation loading of a skullcap specimen. The FE model showed to be sensitive to modeling parameters, in particular to the constitutive parameters of the cortical tables. Nevertheless, this study provides a currently lacking strain-rate dependent material model of cranial bone that has the capacity to accurately predict linear fracture patterns. For the first time, a procedure to reconstruct occurrences of skull fractures using computational engineering techniques, capturing the all-in-all fracture initiation, propagation and final pattern, is presented.

[Rare cases of head traumas incited by propeller blades of small vessels]. / Redkie sluchai travm golovy, prichinennykh lopastyami grebnykh vintov malomernykh sudov.

2 cases of death in males due to multiple head impacts by propeller blades of small vessels are given. The set of the following signs provides a basis for confirming the above-mentioned mechanism and properties of the traumatic object: multiplicity, oblong shape, parallel step-like arrangement of injury lengths, acute-angled M-shaped or Y-shaped injury ends, uneven edges, sometimes with the formation of small flaps and abrasion, lumpy wound walls, multi-fragmented nature of fractures in a limited area of the skullcap and facial skull bones, the location of damage to intracranial structures in the projection of external injuries and fractures of the cerebral skull bones.

Pulsed radiofrequency energy device (PEAK plasmablade™) and CustomBone® Cranioplasty: an appealing surgical rendez-vous.

BACKGROUND: CustomBone® prosthesis is a widely recognized effective and successful technique for the reconstruction of cranial bone defects. Prior the cranioplasty implant, meticulous dissection within thick scar tissue is required. During this delicate surgical manoeuvre is vital to avoid damage to the skin flap itself and to the underlying cerebrovascular structures. We report our experience and potential applications of a novel, pulsed monopolar radiofrequency energy device (PEAK PlasmaBlade™, Medtronic plc). It reduced the incidence of post operativesubgaleal hematoma, the operative times and the intra operative blood loss following cranioplasty compared to the traditional scalpel and scissor dissection. METHODS: The authors present a one centre case series study to review the indications, safety and efficacy of the PEAK PlasmaBlade™ in adult patientsunderwent cranioplasty. Two surgical techniques for tissue dissection were compared: PEAK PlasmaBlade™ versus scalpel and scissor dissection (SSD). Treatment outcomes following each of these surgical approaches, relative to rate of post-operative subgalealhematoma formation, hospital admission, and operative times were compared. RESULTS: A total of 10 patients that had cranioplasty treatment were evaluated. In patients underwent scalp dissection with the PEAKPlasmaBlade™, we observed a reduction in the operative times, in the subgaleal hematoma formation and then in the hospital stay. CONCLUSION: PEAK PlasmaBlade™ revealed to be a safe and effective device in tissues dissection for cranioplasty implant. It provided reduction of the rate of subgaleal hematoma formation, operating times and less potential risk to damage cerebrovascular structures.

Development and global validation of a 1-week-old piglet head finite element model for impact simulations.

PURPOSE: Child head injury under impact scenarios (e.g. falls, vehicle crashes, etc.) is an important topic in the field of injury biomechanics. The head of piglet was commonly used as the surrogate to investigate the biomechanical response and mechanisms of pediatric head injuries because of the similar cellular structures and material properties. However, up to date, piglet head models with accurate geometry and material properties, which have been validated by impact experiments, are seldom. We aim to develop such a model for future research. METHODS: In this study, first, the detailed anatomical structures of the piglet head, including the skull, suture, brain, pia mater, dura mater, cerebrospinal fluid, scalp and soft tissue, were constructed based on CT scans. Then, a structured butterfly method was adopted to mesh the complex geometries of the piglet head to generate high-quality elements and each component was assigned corresponding constitutive material models. Finally, the guided drop tower tests were conducted and the force-time histories were ectracted to validate the piglet head finite element model. RESULTS: Simulations were conducted on the developed finite element model under impact conditions and the simulation results were compared with the experimental data from the guided drop tower tests and the published literature. The average peak force and duration of the guide drop tower test were similar to that of the simulation, with an error below 10%. The inaccuracy was below 20%. The average peak force and duration reported in the literature were comparable to those of the simulation, with the exception of the duration for an impact energy of 11 J. The results showed that the model was capable to capture the response of the pig head. CONCLUSION: This study can provide an effective tool for investigating child head injury mechanisms and protection strategies under impact loading conditions.

Development and global validation of a 1-week-old piglet head finite element model for impact simulations / 中华创伤杂志(英文版)

PURPOSE@#Child head injury under impact scenarios (e.g. falls, vehicle crashes, etc.) is an important topic in the field of injury biomechanics. The head of piglet was commonly used as the surrogate to investigate the biomechanical response and mechanisms of pediatric head injuries because of the similar cellular structures and material properties. However, up to date, piglet head models with accurate geometry and material properties, which have been validated by impact experiments, are seldom. We aim to develop such a model for future research.@*METHODS@#In this study, first, the detailed anatomical structures of the piglet head, including the skull, suture, brain, pia mater, dura mater, cerebrospinal fluid, scalp and soft tissue, were constructed based on CT scans. Then, a structured butterfly method was adopted to mesh the complex geometries of the piglet head to generate high-quality elements and each component was assigned corresponding constitutive material models. Finally, the guided drop tower tests were conducted and the force-time histories were ectracted to validate the piglet head finite element model.@*RESULTS@#Simulations were conducted on the developed finite element model under impact conditions and the simulation results were compared with the experimental data from the guided drop tower tests and the published literature. The average peak force and duration of the guide drop tower test were similar to that of the simulation, with an error below 10%. The inaccuracy was below 20%. The average peak force and duration reported in the literature were comparable to those of the simulation, with the exception of the duration for an impact energy of 11 J. The results showed that the model was capable to capture the response of the pig head.@*CONCLUSION@#This study can provide an effective tool for investigating child head injury mechanisms and protection strategies under impact loading conditions.

Next-generation personalized cranioplasty treatment.

Decompressive craniectomy (DC) is a surgical procedure, that is followed by cranioplasty surgery. DC is usually performed to treat patients with traumatic brain injury, intracranial hemorrhage, cerebral infarction, brain edema, skull fractures, etc. In many published clinical case studies and systematic reviews, cranioplasty surgery is reported to restore cranial symmetry with good cosmetic outcomes and neurophysiologically relevant functional outcomes in hundreds of patients. In this review article, we present a number of key issues related to the manufacturing of patient-specific implants, clinical complications, cosmetic outcomes, and newer alternative therapies. While discussing alternative therapeutic treatments for cranioplasty, biomolecules and cellular-based approaches have been emphasized. The current clinical practices in the restoration of cranial defects involve 3D printing to produce patient-specific prefabricated cranial implants, that provide better cosmetic outcomes. Regardless of the advancements in image processing and 3D printing, the complete clinical procedure is time-consuming and requires significant costs. To reduce manual intervention and to address unmet clinical demands, it has been highlighted that automated implant fabrication by data-driven methods can accelerate the design and manufacturing of patient-specific cranial implants. The data-driven approaches, encompassing artificial intelligence (machine learning/deep learning) and E-platforms, such as publicly accessible clinical databases will lead to the development of the next generation of patient-specific cranial implants, which can provide predictable clinical outcomes. STATEMENT OF SIGNIFICANCE: Cranioplasty is performed to reconstruct cranial defects of patients who have undergone decompressive craniectomy. Cranioplasty surgery improves the aesthetic and functional outcomes of those patients. To meet the clinical demands of cranioplasty surgery, accelerated designing and manufacturing of 3D cranial implants are required. This review provides an overview of biomaterial implants and bone flap manufacturing methods for cranioplasty surgery. In addition, tissue engineering and regenerative medicine-based approaches to reduce clinical complications are also highlighted. The potential use of data-driven computer applications and data-driven artificial intelligence-based approaches are emphasized to accelerate the clinical protocols of cranioplasty treatment with less manual intervention and shorter intraoperative time.

Short-Term Administration of HIV Protease Inhibitor Saquinavir Improves Skull Bone Healing with Enhanced Osteoclastogenesis.

BACKGROUND: Using immunomodulatory methods to address the challenging issue of craniofacial bone repair may be a potentially effective approach. The protease inhibitor saquinavir has been shown to inhibit the inflammatory response by targeting the toll-like receptor 4/myeloid differentiation primary response complex. Independently, inhibition of toll-like receptor 4 or myeloid differentiation primary response led to enhanced skull bone repair. Therefore, the authors aimed to investigate the effects of saquinavir on skull bone healing. METHODS: The effects of saquinavir on skull bone healing were assessed by means of gene expression, histology, immunohistochemistry, and tomography in a mouse calvarial defect model. Subsequently, the role of saquinavir in cell viability, migration, and osteogenic and osteoclastogenic differentiation was also evaluated in vitro. RESULTS: One-week saquinavir administration improved skull bone healing based on micro-computed tomographic and histomorphometric analyses. Compared to the vehicle control, 1-week saquinavir treatment (1) enhanced osteoclast infiltration (tartrate-resistant acid phosphatase staining) at day 7, but not at days 14 and 28; (2) induced more CD206 + M2 macrophage infiltration, but not F4/80 + M0 macrophages at days 7, 14, and 28; and (3) elevated osteoclastogenic gene RANKL (quantitative polymerase chain reaction) expression and other osteogenic and cytokine expression. Furthermore, in vitro data showed that saquinavir administration did not influence MC3T3-E1 cell migration or mineralization, whereas higher concentrations of saquinavir inhibited cell viability. Saquinavir treatment also enhanced the osteoclastic differentiation of bone marrow-derived precursors, and partially reversed high-mobility group box 1-driven osteoclastogenesis inhibition and elevated proinflammatory cytokine expression. CONCLUSION: The improved skull bone repair following short-term saquinavir treatment may involve enhanced osteoclastogenesis and modulated inflammatory response following skull injury. CLINICAL RELEVANCE STATEMENT: The authors' work demonstrates improved skull bone healing by short-term application of saquinavir, a drug traditionally used in the treatment of acquired immunodeficiency syndrome. As such, saquinavir may be repurposed for skeletal repair.

Assessment of brain injury characterization and influence of modeling approaches.

In this study, using computational biomechanics models, we investigated influence of the skull-brain interface modeling approach and the material property of cerebrum on the kinetic, kinematic and injury outputs. Live animal head impact tests of different severities were reconstructed in finite element simulations and DAI and ASDH injury results were compared. We used the head/brain models of Total HUman Model for Safety (THUMS) and Global Human Body Models Consortium (GHBMC), which had been validated under several loading conditions. Four modeling approaches of the skull-brain interface in the head/brain models were evaluated. They were the original models from THUMS and GHBMC, the THUMS model with skull-brain interface changed to sliding contact, and the THUMS model with increased shear modulus of cerebrum, respectively. The results have shown that the definition of skull-brain interface would significantly influence the magnitude and distribution of the load transmitted to the brain. With sliding brain-skull interface, the brain had lower maximum principal stress compared to that with strong connected interface, while the maximum principal strain slightly increased. In addition, greater shear modulus resulted in slightly higher the maximum principal stress and significantly lower the maximum principal strain. This study has revealed that using models with different modeling approaches, the same value of injury metric may correspond to different injury severity.

Three-Dimensional Printing Model Enhances Craniofacial Trauma Teaching by Improving Morphologic and Biomechanical Understanding: A Randomized Controlled Study.

BACKGROUND: Teaching about craniofacial traumas is challenging given the complexity of the craniofacial anatomy and the necessity for good spatial representation skills. To solve these problems, three-dimensional printing seems to be an appropriate educative material. In this study, the authors conducted a randomized controlled trial. The authors' main objective was to compare the performance of the undergraduate medical students in an examination based on the teaching support: three-dimensionally printed models versus two-dimensional pictures. METHODS: All participants were randomly assigned to one of two groups using a random number table: the three-dimensionally-printed support group (three-dimensional group) or the two-dimensionally-displayed support group (two-dimensional group). All participants completed a multiple-choice question evaluation questionnaire on facial traumatology (first, a zygomatic bone fracture; then, a double mandible fracture). Sex and potential confounding factors were evaluated. RESULTS: Four hundred thirty-two fifth-year undergraduate medical students were enrolled in this study. Two hundred six students were allocated to the three-dimensional group, and 226 were allocated to the two-dimensional group. The three-dimensionally printed model was considered to be a better teaching material compared with two-dimensional support. The global mean score was 2.36 in the three-dimensional group versus 1.99 in the two-dimensional group (p = 0.008). Regarding teaching of biomechanical aspects, three-dimensionally-printed models provide better understanding (p = 0.015). Participants in both groups exhibited similar previous student educational achievements and visuospatial skills. CONCLUSIONS: This prospective, randomized, controlled educational trial demonstrated that incorporation of three-dimensionally-printed models improves medical students' understanding. This trial reinforces previous studies highlighting academic benefits in using three-dimensionally-printed models mostly in the field of understanding complex structures.

Two peculiar cases of cranial fractures running through craniotomy burr holes: may this be a kind of "exception" to the Puppe rule.

A correct assessment on the position, path, and direction of fracture lines is crucial when the sequence of different injuries on the skull has to be ascertained. In this context, the so-called Puppe's rule on intersecting fracture lines has always been considered a cornerstone of such an investigation. However, there is one factor that has never been previously considered: how do fracture lines behave when they reach the edges of an old and remodeled hole from a previous craniotomy? Two peculiar cases are presented of subjects undergoing cranial fractures due to blunt force trauma (case 1) and gunshot (case 2). Both previously underwent neurosurgical operations with persistence of the burr holes produced by the craniotomy drill (15 and 20 years before death). What was arguable, according to Puppe's rule, was that the fracture lines, when at the edge of the craniotomy hole, stopped. However, what has been detected was different than what expected: fracture lines continued exactly in the opposite direction, as though they were "skipping" the hole, following the same direction and the same axis and stopping a few centimeters over on the opposite side of the craniotomy hole. Puppe's rule has never been refuted, but these cases are the closest to an exception ever seen in forensic anthropology.

Ballistic trauma caused by military rifles: experimental study based on synthetic skull proxies.

Rifles are often involved in violent deaths such as homicide and suicide. Consequently, expert knowledge and experimental forensic investigations are important to clarify the nature of ballistic trauma when applied to the human head and neurocranium. This study investigated differences in entrance wound morphology with Synbone® spheres which are described as being comparable to human flat bones. A series of ballistic experiments were conducted using two different rifle calibers (5.56 × 45 mm and 7.62 × 39 mm Full Metal Jacket (FMJ)). Synbone® spheres were used for close-range 0.3 m simulated executions as well as at 25 m and 35 m to simulate urban and military engagements. Results were compared with previously published experimental studies using similar military ammunition. In our study, entry wound morphology closely resembles real forensic cases compared to exit wound and overall shape morphology independently of the distance and the caliber. Circumferential delamination was clearly visible with full metal jacket (FMJ) rounds, yielding similar damage pattern morphology to the human crania. This study documented the presence of hydraulic burst or shock in all ten rounds from all three distances. Krönlein shots were also observed in some cases. Synbone® spheres constitute an acceptable synthetic surrogate for ballistic experiments. The present study offers new initial data on the behavior of Synbone® proxies in ballistic testing of military ammunitions; FMJ gunshot injuries to the human head, for distances that have not previously been published, suggesting that efficient tests can take place under these conditions. Further research on experimental ballistics with a larger number of controlled factors and multiple repetitions is recommended to verify the results of this pilot study before applied in forensic simulations.

Traumatismo craneal por maltrato. Revisión de nuestra experiencia / Abusive head trauma. A review of our experience

Introducción: El traumatismo craneal por maltrato (TCM) se define como todo traumatismo que ocasiona lesiones intracraneales debido a un impacto directo infligido y/o zarandeo, y se caracteriza por la tríada de encefalopatía, hemorragias retinianas y hematoma subdural. El objetivo de este estudio es conocer las características epidemiológicas, clínicas y radiológicas, así como las secuelas de los pacientes diagnosticados de TCM. Pacientes y métodos: Estudio descriptivo observacional retrospectivo de los 19 pacientes diagnosticados de TCM en un hospital terciario entre 1990 y 2018, ambos inclusive. Resultados: La edad media de los afectados fue de 5,5 meses y existe paridad entre ambos sexos. Las anamnesis aportadas por los cuidadores fueron: ausencia de traumatismo (n = 9), antecedente de caída (n = 6) y zarandeo (n = 4). La clínica inicial más prevalente fueron los síntomas graves, y las convulsiones fueron el síntoma más frecuente (n = 8). Quince pacientes presentaron hemorragias retinianas y otros 15, hematoma subdural o higroma. Dos pacientes fallecieron, siete presentaron secuelas en el alta y 10 de los 12 pacientes en los que se realizó seguimiento presentaron secuelas tardías manifestadas como secuelas cognitivas/comportamiento (n = 5) o como secuelas neurológicas (n = 6). Conclusiones: Las características epidemiológicas, clínicas y radiológicas son muy similares a las publicadas en la bibliografía. La presencia de secuelas es prevalente y éstas se manifiestan tanto como problemas cognitivos y de comportamiento como por secuelas neurológicas.(AU)

Introduction: Abusive head trauma (AHT) is defined as an injury to the skull or intracranial contents due to inflicted blunt impact and/or shaking. It is characterized by the triad: encephalopathy, retinal haemorrhages and subdural hematoma. The main objective is to know the epidemiological, clinical and radiological characteristics; as well as the short and long term outcomes of patients diagnosed with AHT. Patients and methods: It is a descriptive, observational and retrospective study of the 19 patients diagnosed with AHT at a tertiary hospital from 1990 to 2018, both included. Results: The mean age of the patients was 5,5 months with parity between both sexes. The principal medical histories reported were: absence of trauma (n = 9), history of a short fall (n = 6) and shaking (n = 4). The most frequent initial presentation was severe, and seizures was the main symptom (n = 8). Retinal haemorrhages were present in fifteen patients and subdural hematoma or hygroma in fifteen patients. Two patients died, seven presented short-term outcomes, and ten of the twelve patients who were performed a follow-up presented long-term outcomes. These outcomes were manifested as cognitive or behavioural disorders (n = 5) or as neurological disorders (n = 6). Conclusions: The epidemiological, clinical and radiological characteristics found are very similar to those reported in the literature. The prevalence of outcomes is high and they appear as cognitive or behavioural disorders.(AU)